Corrugated Cardboard Production LineHome > Products > Corrugated Cardboard Production Line
LX 5 Layers Corrugated Cardboard Production Line in Indonesia

GIGA LX 5Layers Corrugated Cardboard Production Line in Indonesia

 

LXC-320S(360s) Single Facer 

  .png

1. Desigh Speed:120-200m/min

2. Expiry width:1400mm-2500mm

3. Flute profiles:A/C/B/E etc.available discretionarily

4. Vacuum adsorbable style transmitting cardboard equipment,lxc320sb with wind comtrol

5. Uppr-lower corrugating roller seat and whole machine are designed separately,this can be changed hanging in groups,lxc320sb bridge with load-unload guideway,lxc320sb exchanging roller quickly

6. Corrugator glue roller and upper roller are designed to groups guideway slippage load-unload, convenient and swift.

7. Gimbal transmissinon,fission structure with unattached drive box,transmission more stable,close style gear transmission oiliness lubricated,prolong the use life of gear.

8. The upper corrugating roller, pressure roller and glue roller adopt pneumatic control.

9. The axletree of corrugated and pressure roller adopts high temperature resistant lube.

10. Corrugated cardboard machine adopt electomotion paste insulation set, lxc320sbthe glue parts running separately while the main motor stopped,prevent paste from drying up.

11. Electromotion adjusted figure show the glue quantity or manual adjust the glue quantity.

12. The upper-lower corrugating roller are made of 48Cr Mo high quality alloy steel,lxc320sb after heat-treatmnt.The rigidity is HRC56-60,the surface are whetted and plating chrome.

13. Corrugated box machine and single facer corrugated machine are made in good quality with good price.


We provide loan to below business situation
1. The value of order over RMB 1 million (including 1 million).
2. Only for Fully Automatic Corrugated Box Machine  LX308N, LX-608CN LX707N or corrugated machine production lineinclude LXC-180NN, LXC-220H1.8N models.
3. We accept O/A (Open account), it based on the credit level of buyer's bank credit report.
4. The details please consult with our sales department.

 


LXC-1500H Hydraulic Mill Roll Stand


Control type: whole hydraulic type

Characteristic

*   Symmetry structure could install two bundles

    real paper at the same time, and change the

    paper without any stop.

*   Adopt hydraulic drive that could make the

    real paper lift-lower, clamp and release and

    move.

*   Adopt pneumatic strain to adjust the real

     paper.

*   Expanding clips design.

*   Tension control by pneumatic brake system,

     manual controlled and also can be

controlled by splicer.

 


LX-1100  Pre-heater
(Model:600/900/1000/1100 S/D/T/Q)
The maximum paper width: 2500MM.
* Pass the national pressure vessel inspection,
and get a safe certification about national
pressure vessel security;
* One is fixed, another one free to move, both
of them are steel products.
* Warm-range adjustment adopts electric
control.
* Power motor 1/2HP gear with a turbine and a
drive arm with gear transmission.
* The preheated rollers are electrically rotating,
with reducing motor and single ball bearing
can set idle running with stable speed.

  

 

 

 

 

 

 

 

 

"LXC-320S Single Facer

Available working width: 1400-2200mm.
Design speed: 180m/min.

Paper delivering by suction blower, to keed good flute under high speed working;
Groove’s width of lower corrugating rollers not more than 2.5mm, reduce the stripe’s impress on single side corrugated cardboard;
Universal joint transmission of driving unit, separated driving case structure, reduce the shaking;
Oil-immersed and closed reduction gear box,reduce the shaking of machine;
requirements)
"



 

LXC-1B/2B Single/Double Decks Feeding Bridge

 

  Available width: 1400 – 2500 mm

*    Adopt suction tension and its adjusting device,

     assure the sticking and stable

     paperboard pass by of the heating plate

*    Motorized alignment adjustment, easy and swift

*    Two set of operation panels, make easy adjustment

     up or down the bridge

*    Synchronous motor driving, with high and low speed

     stacking device, to transport

     and stack the corrugated paperboard.

 

 

 



 

 

 

 

 

"LXC-288D Glue Machine(Spring Press Board is for option)

Working width:1400-2200mm
* Design speed: 180mm/min 
* The surface of glue roller was treated by texture
embossing and chrome plated;
* The surface of scarping glue roller is grinding
treatment, the pressure roller is chrome plated.
* Glue roller diameter:288mm
* Automatic recycle gluing to avoid glue dry
* With pre-heater device to faster glue melting.
"


"LXC-636E Steam-heating & Press-cooling System
LXC-636E-D Driving Roller

Specification:
Available width:1400-1800mm
Design speed:120m/min 
Voltage: 380V 50Hz 




 



 



 

"LXC-150P Slitter Scorer With Thin Blade

Technical Parameter
* Design speed:150m/min
* 4 blades 6 scores or 5 blades 8 scores; 
* the whole machine can move left-right ±90mm
* Voltage:380V 50Hz

Characteristics
* Frequency conversion timing can automatically follow production speed, keep in-phase
* In the process of producing, auto- grinding edge system can be still working no need stop,
and can set the interval meter and the grinding time at any time according to the material
and condition of hem.
* 1.3mm high quality blade slits cardboard in high speed, slitting line is smooth, beautiful,
unchanged shape, and good for printing.
"

"LXC-150/180 Double Layer NC Cutoff with Rotary Blade

Avaliable width:1400-2200mm
Design speed:180m/min
Cut length:Max.9999mm Min.500mm
Precision(in steady speed):±1mm
* Special structural design, strength and
excellent mechanical wall panels and the base 



 




Company Information

Our Company

-.jpg


With 25 years experience of carton machinery, our businesses now have covered CIS, Latin America, Middle East, Europe,

North America, Southeast Asia etc..

Professional design team, offering free foundation of the whole plant; 
Well-trained electrical engineers and mechanics offering installation, maintenance and workers training, till the capacity and

performance of the machine were accepted by buyers.


Our Customers And Our Exhibition

 Better machine better carton, so as to Better business.

case 1


 


case 2



 Our Exhibition  

2 -.jpg

 Our Certificates  



.jpg


 

Related Product:
Related Article:
Video:
Download:

 

  • LX-608 Carton Box Making Line Ukraine
  • LX-608C in Malaysia
  • SWL180-1800 5layer Indonesia
  • SWL 250-2200-3 Layers Corrugated Cardboard Production Line Ukraine
 
QUICK LINK: